Experiments ยป |
||
---|---|---|
The Experiments Node is used to add, delete and rename the experimental sets. An experimental set is defined as a single experiment, which may have multiple measurement points.
Grid ViewsIn this node, there is also a Design Variables grid, where you may select the variables that are used to design the experiments. Actions Grid Views Description of Experimental Design {i} Design Variables
Description of Experimental Design
Top of Topic This grid is used to add, delete, rename and include the experimental sets, and is organized as follows:
Adding a Set You may add a new set by going to the last row and entering the name of the desired set. The row will change to edit mode and you may save this new set with the <ENTER> key or by clicking on the pencil icon in the row header. This set will now be part of the Project. Deleting a Set There are two ways to delete a compound:
{i} Design Variables
Top of Topic This is a documentation-only grid, and is only used to select the variables that are needed to document the design of the experiments. To include a variable, click on its corresponding check box. After including the variables here, you may enter their design values in the Description of Experimental Design grid. Actions Add Sets Delete Marked Sets Copy Marked Sets Quick Run Open Solver
Delete Marked Sets
This action is used to delete more than one set at the same time.
Copy Marked Sets
Top of Topic This action is used to copy one or more sets.
See Also: |