Compounds Properties |
||
---|---|---|
The Compounds Properties Node displays values for the Heat of Formation, Density and Specific Heat (Cp).
Tabbed ViewsThis information entered here is used only for a special class of models. This special class includes:
Actions Tabbed Views Heat of Formation Specific Heat (Cp) Density
Heat of Formation
In this view, you may enter the Heat of Formation for compounds at standard conditions (25C and 1 atm). Values can be provided for Liquid, Gas or Solid phases. The information entered here is used only if the Energy balance model is enabled for Temperature calculations in the Reactor node. More information is provided in the Example.
Specific Heat (Cp)
Top of Topic In this view, you may enter Gas, Liquid or Solid Phase Specific Heat (Cp) properties as a cubic polynomial function of temperature:
The information entered here is used only if the Energy balance model is enabled for Temperature calculations in the Reactor node. More information is provided in the Example. The view is organized as follows:
Density This view is similar to Specific Heat (Cp) view. For each compound and for Liquid or Solid phase, you may load the correlation for Density. These values are used only when volume or flow changes due to reaction are to be calculated from the densities. Actions Quick Run Open Solver See Also: |