Results ยป |
||
---|---|---|
The Results Node displays the solution summary and information about measurement deviations.
ViewsActions Views Solution Summary Measurement Deviations Measurement Deviations by Set Charts
Solution Summary
Top of Topic This view is read-only and displays the Solution Summary. It is organized in columns as explained below:
Measurement Deviations
This view is stacked together with the Measurement Deviations by Set and Charts views. It displays the list of components selected in the Weights → Reconciled Measurements grid. For each component, the Deviation and the Weighted Deviation are displayed. The deviation for pressure is also included when it is reconciled or controlled. When Ignore Zero Measurements option is selected in the Weights node, the zero experimental data points are excluded in the calculation of the Deviation. The sum of these deviations should match the corresponding Weighted LSQ and LSQ shown in the Solution Summary grid. By clicking on the header of a column, the rows can be sorted: either in ascending or descending order, by alphabetical or numerical criteria, according to the type of data in the column selected. Top of Topic
Measurement Deviations by Set
This view is stacked together with the Measurement Deviations and Charts views. The information shown here is similar to the previous view, except that the values are shown individually for each set. Top of Topic
Charts
Top of Topic Four pie charts are displayed here, graphically comparing the contribution of each variable or experimental set to the total Least Squares Error(LSQ). Variables or sets whose LSQ contribution is among the seven biggest are shown, while the remaining ones are merged into the Others sector. The following charts are shown:
Actions Phase Values Quick Run Open Solver
Phase Values
Phase Values is used to select how the phase values of compounds should be displayed in all the child nodes. It has up to three sub-actions: Concentration This is the default option. Concentration (typically Molarity) values are shown for liquid and gas phase. Moles The total moles in each phase for every compound is shown. Partial Pressure for gas; Concentration for Liquid Concentration (typically Molarity) values are shown for liquid phase and Partial Pressure for gas phase. See Also: |